亚洲精精品,久国久产久精永久网页,精品视频免费一区,91亚洲日本,久久伊人五月天,亚洲国产主播一区,国产一区二区啪啪

What accelerators and curing agents are used in epoxy asphalt anti-corrosion coatings? The commonly used accelerators and curing agents in epoxy asphalt anti-corrosion coatings are as follows: accelerator DMP-30 (2,4,6-tris (dimethylaminomethyl) phenol) 6: is a commonly used epoxy accelerator. It is a colorless or light yellow viscous liquid that is soluble in alcohols, benzene, acetone, and cold water. In epoxy asphalt anti-corrosion coatings, it can effectively accelerate the curing reaction speed and shorten the curing time. The recommended dosage is generally 3% -15% of the epoxy curing dose. As the dosage increases, the curing speed accelerates, but the brittleness of the cured material may increase. curing agent Polyamide curing agent: The molecular structure contains flexible fatty acids and active amine groups. When mixed with epoxy resin, the curing reaction is mild and has a long usable time. The epoxy resin cured with it has good toughness, and the amount of polyamide resin added can be adjusted greatly. The relative weighing accuracy requirement is not very strict. Meanwhile, polyamide curing agents are actually non-toxic, and the epoxy resin cured with them is non-toxic and can be applied in the food industry. Polyamine curing agent: With high reactivity, it can cure epoxy asphalt coatings at room temperature or lower temperatures. For example, fatty amine curing agents such as ethylenediamine and diethylenetriamine have fast curing speeds, but they have relatively high irritant odors and toxicity; Aromatic amine curing agents such as meta phenylenediamine have good heat resistance and mechanical properties, but the curing temperature is higher and the curing time is longer. Phenolic curing agent: It has good heat resistance and chemical corrosion resistance. The cured coating can maintain good performance in high temperature and chemical corrosion environments. However, its curing process is relatively complex and may require higher curing temperatures and longer curing times. Anhydride curing agent 4: such as phthalic anhydride, maleic anhydride, etc. When acid anhydride reacts with epoxy resin, it usually needs to be carried out at a higher temperature. The cured product has good heat resistance and mechanical properties, and its chemical corrosion resistance is better than that of amine curing agents. Which company produces DMP-30 with the best cost-effectiveness? The DMP-30 produced by Yueyang Zhongzhan Technology has a quality standard far exceeding the national standard, and its performance surpasses that of some foreign brands. Those who have used it all say good. Which company produces the most cost-effective polyamide curing agent? Polyamide curing agent, brand 650651, is the main brand produced by Yueyang Zhongzhan Technology, with excellent quality and price, and worry free after-sales service. Hurry up and make a phone call to ask: 13975090964

What are the accelerators for epoxy resin powder coatings? In epoxy resin powder coatings, the function of accelerators is to speed up the curing reaction rate, lower the curing temperature, or shorten the curing time. The following are common types of accelerators: Amine-based accelerators Tertiary amines: Such as triethylamine, triethanolamine, 2,4,6-tris(dimethylaminomethyl)phenol (DMP-30), etc. Triethylamine can accelerate the reaction rate between epoxy resin and acid anhydride curing agents; DMP-30 is a highly active accelerator that can be used in curing systems such as epoxy-acid anhydride and epoxy-phenolic. It can significantly reduce the curing temperature and shorten the curing time. Imidazoles: Such as 2-methylimidazole, 2-ethyl-4-methylimidazole, etc. These accelerators have high activity and are used in small amounts, and they have good accelerating effects on curing systems such as epoxy-dicyandiamide and epoxy-acid anhydride. For example, in the epoxy-dicyandiamide system, 2-methylimidazole can make the curing reaction proceed rapidly at a relatively low temperature. Organometallic compounds Organotin compounds: For example, dibutyltin dilaurate, stannous octoate, etc. Dibutyltin dilaurate is commonly used in epoxy-polyester powder coatings. It can promote the reaction between the carboxyl groups in the polyester resin and the epoxy groups in the epoxy resin, accelerate the curing process, and improve the cross-linking density and performance of the coating. Organozinc compounds: Such as zinc naphthenate, zinc octoate, etc. They can be used as accelerators for the epoxy-acid anhydride curing system, reducing the activation energy of the curing reaction and making the reaction easier to occur. Quaternary ammonium salts and quaternary phosphonium salts Quaternary ammonium salts: Such as tetramethylammonium chloride, tetrabutylammonium bromide, etc. These accelerators can promote the curing reaction of epoxy resin through ionic action and can play a role in accelerating the curing in some epoxy-amine curing systems. Quaternary phosphonium salts: For example, ethyltriphenylphosphonium bromide. It has good thermal stability and shows excellent accelerating effects in high-temperature curing powder coating systems, improving the curing rate and performance of the coating. Other accelerators Borides: Such as boron trifluoride monoethylamine complex. It is a strong Lewis acid and has a strong accelerating effect on the curing of epoxy resin. It is commonly used in curing systems such as epoxy-amine and epoxy-phenolic. However, when using it, attention should be paid to controlling the dosage to avoid affecting the performance of the coating. Yueyang Zhongzhan Technology specializes in the production of epoxy accelerators DMP-30/K54. The product quality far exceeds the national standards. The production process is mature, and the product performance is excellent. Epoxy coating production enterprises are welcome to establish long-term and friendly cooperation with us directly. Contact person: Ms. Kim Xie Mobil/Whatsapp: 008613975090964 

  Zhongzhan Technology Helps Well-known car enterprise Overcome Coating Technical Challenges and Unveils a New Chapter of Collaboration? After more than a year of unremitting efforts and over a dozen sample improvements and deliveries, under the leadership of General Manager Yu Zhiliang and Technical Director Engineer Liu, the team of Zhongzhan Technology has successfully assisted Well-known car enterprise in overcoming the technical challenges of automotive coating anti-corrosion and acid resistance. This technological breakthrough not only demonstrates Zhongzhan Technology's profound expertise and innovative capabilities in the field of coating technology but also enables the company to smoothly become a supplier of coating additives for Well-known car enterprise Group, marking an important milestone in the cooperation between the two parties. The achievement of this result is a major victory for Zhongzhan Technology and also indicates that the company has taken a solid step in the field of automotive coating technology services. Zhongzhan Technology sincerely welcomes enterprises and individuals who have problems in coating anti-corrosion and acid resistance technology and need professional technical guidance to come for exchanges and cooperation. With advanced technology and rich experience, Zhongzhan Technology can provide customized production services according to the diverse coating needs of different customers, and tailor high-quality coating solutions for clients.?

Focus on epoxy amine additives (curing agents, promoters, etc.) research and development, production and management